2 - 10
Data Distribution Box
Data Sheet PDF
The BED-108/2 is used when the default daisy-chain configuration of the telemetry signal must be changed into a star configuration or if the Ernitec telemetry receivers are daisy-chained on several lines.
The BED-108/2 Accepts RS-232, RS-422 and RS-485 simplex serial signals.
In addition to distributing the signal from the
input terminal to the eight outputs the BED-108/2
amplifies the signal for extended transmission
distance and provides galvanic separation of the
input and the outputs thereby eliminating
ground loop problems.
The BED-108/2 can extend the transmission distance up to 5 kilometres.