Video Matrix

Data Sheet PDF

518M Matrix

  • 16 cameras
  • 8 monitors
  • 32 alarm inputs
  • Open Alarm Protocol
  • Advanced alarm handling
  • 10 Keyboards
  • 64 Programmable Sequences
  • Remote control of PTZ cameras

Manual

Expansion

All CCTV systems require a certain number of cameras at the installation phase, but should also provide facilities for future expansion. Therefore the Ernitec systems are built on a modular base. SYSTEM 500M is available with max. 16 camera inputs, but can be part of a larger decentralised video matrix system.

 

PTZ Camera Control

The systems can activate telemetry receivers for controlling standard or high-speed pan/tilt and zoom cameras. Control of all cameras can be selected from any keyboard, or automatically in an alarm situation.

Pan/tilt and zoom cameras can also be sequenced between any or all of the pre-set positions, stopping at each position for a pre-programmed time.

 

 

Camera Sequences

As many as 8 different camera sequences can be defined. These sequences can be displayed on any monitor: Each camera sequence can contain up to 64 entries in any order and each entry can have an individual dwell time.

 

 

Camera ID

SYSTEM 500M operates with a changeable 4 digit camera ID, SYSTEM 500M with a 3 digit camera ID, providing the operator with easy and logical camera identification for both local or remote cameras.

 

Camera Text

For easy identification of the camera location, site location etc. all SYSTEM 500M and 1000M units provide text information to the system monitors. For each camera in the system, it is possible to have a text string of up to 20 user programmable characters.

Camera text is located at the bottom of the monitor as standard, but can be moved to other positions.

 

Alarm Handling

The Ernitec systems provide facilities to display each alarm group on its own monitors. This makes the operator able to distinguish between the different alarm groups in an easy and fast way. It is possible to select which camera(s) will be displayed as the result of an alarm event and the relevant monitor(s).

Each alarm event can call up to 4 cameras, allowing the system to supplement the alarmed camera with pictures from the surrounding or important areas.

© 2015 Ernitec.

All rights reserved.

Ernitec Surveillance

Tempovej 41

2750 Ballerup

Denmark

Follow us on